Piezo-ceramik elemanlar ile 1.7mhz. Ultrasonik titreşimle suyu yaklaşık 1μm büyüklüğünde aerosol haline getirir.
Cihazlar 48V ile çalışır bu sebeple elektrik tüketimi çok düşüktür.
Cihazın dış yüzeyi yüksek kaliteli korozif olmayan plastik yapıdan mamul olup reverse osmos su ile çalıştırılması gereklidir. Cihaz içinde su seviye sensörleri vardır.
Tüm kontrol sistemlerine uygun olup cihaz on/off veya oransal kontrol edilebilir.
Cihazın kapasitesini 0-10 V sinyale göre oransal olarak ayarlamak mümkündür.
Cihaz içinde kuru çalışma koruması, aşırı ısınma koruması, taşma koruması mevcuttur.
Cihazların 48V beslemesi için gerekli transformatör opsiyonel temin edilir.
The AIRWIN KB series is designed for ultrasonic humidification in air ducts or air-conditioning chambers. The easy and low-cost modular design allows for an output range from 1.2 to 9.6 kg/h.
Excitation of the water with 1.7 MHz frequency produces smallest aerosols with diameters of 1-3 µm. This is achieved by a low input of energy, because the water is not vaporized by heat influx. The housings made of ABS plastic are corrosion-resistant.
08.02.2017 BG-17017MY
1,2 - 9,6 kg Kanal Tipi Ultrasonik Nemlendiriciler 1.7 MHz -1-3 µm Gövde ABS
max. humidification output 1.2 kg/h
Number of transducers: 2 - Power consumption 65 VA
height x width x depth 158 x 201 x 220 mm
Hose water inlet Øexternal 6 mm
Hose water overflow/discharge Øinternal 10 mm
Weight 1.4 kg - Power supply 48 / 50 V / Hz
Conductivity of demineralised water 5...20 µS/cm
Ambient temperature 5...45 °C - Ambient humidity 0...90 % RH
Water temperature 5...40 °C - Water pressure 1...4 bar
Brand AIRWIN® Model KB-2 Item No. 7900002